Multi-Wave Forstner Bit – D35x60 L90 S=10

Proizvajalec

52,45 EUR  Cena: 42,99 EUR + DDV 

IZRAČUN ZA OBROČNO PLAČEVANJE NA SPLETU:

1,46 EUR × 36 obrokov
2,19 EUR × 24 obrokov
4,37 EUR × 12 obrokov

Proizvajalec:  
Professional
Na zalogi pri dobavitelju: 10 KOS | Dostava: 3-5 dni
+
  • Multi-Wave Forstner Bit - D35x60 L90 S=10

    52,45 EUR  Cena: 42,99 EUR + DDV 

    Želite prejeti ponudbo?








      Ponudbo vam bomo poslali v 2 do 3 delovnih urah.

    •  Želite prejeti ponudbo?

      Multi-Wave Forstner Bit - D35x60 L90 S=10

      52,45 EUR  Cena: 42,99 EUR + DDV 

      Želite prejeti ponudbo?








        Ponudbo vam bomo poslali v 2 do 3 delovnih urah.

        Naročite danes, dostavljamo: sreda, 03. 04. – petek, 05. 04.

      Šifra izdelka (SKU): EMWS35

      Zagotavljamo najnižje cene v Evropi.

      Cene v drugih evropskih državah so nižje zaradi manjših davkov, na primer 19 % DDV v Nemčiji, kar pomeni 3 % nižje cene v primerjavi s Slovenijo, kjer je DDV 22 %.

      Opis

      • Precise drilling at an extreme angle even when drilling manually.
      • Removable centre bit or tip.
      • Shank with 3 flats eliminates slipping.
      • 4x prolonged length using adaptors.
      • New grasping technology of the centring drill bit without screwing.
      • Rapid drilling of up to 50 mm diameter.

      Multi-Wave Forster Bit is an improved version of a Wave Boring Bit fitted with an adjustable centring drill bit. Designed for flat or slant surfaces or at angle boring. Bores effortlessly and easily into softwood and hardwood. Creates bores with smooth bottoms and walls. Friction, grain pulling as well as overheating of the tool are minimized thanks to the peripheral cutting edge with patented wave design. Adjustable centring point or centring drill accurately guide the boring bit even at an angle.

      Patented boring bit geometry ideal for drilling in beams at an angle, overlapping bores, partial stroke in materials and deep drilling. Extreme drilling speed and precise bores without burrs make this bit an ideal choice for woodworkers.

      Unique shank design with 3 flats eliminates slipping in the chuck. You can use adaptors to prolong the length up to 360 mm. MK2 cone available for clamping in a woodturning lathe.

      *NOTE- centring point and drill bit are bought separately. You can choose to drill at an angle either with a centring point or a centring drill.

      Recommended use: Softwood and Hardwood.
      Packed in a PVC tube with a euro hole.

      • Total Length: 90 mm
      • Work Length: 60 mm

      • Recommended rpm:

      Drill Diameter

      Softwood

      Hardwood

      > D 10 mm

      2400

      2000

      > D 16 mm

      2400

      1500

      > D 25 mm

      1800

      1000

      > D 35 mm

      1600

      900

      > D 50 mm

      1400

      700

      Dodatne informacije

      Teža 0,145 kg
      Dimenzije 42 × 42 × 96 cm
      Proizvajalec

      Poreklo

      Garancija

      Šifra izdelka (SKU):  EMWS35 Kategorija izdelka: 
      Stroji za obdelavo lesa in kovin
      Zapri Moj voziček
      Zapri
      kategorije